CNP820H-2P White Junction Box for Compact Cable Connections

TheCNP820H-2P White Junction Box is designed for projects where electrical wires need to be connected and arranged in a compact enclosure. Instead of leaving the connection point exposed, the junction box brings the wiring section into a dedicated housing, creating a neater connection point for electrical installations.

This model is a 2-pole configuration, making it suitable for applications that require two electrical connection paths. The product is rated at 10A and 250V, with a wiring range of 2×1.5mm². These specifications make it a practical option for a variety of low-voltage electrical wiring applications when the actual load and installation conditions are within the rated limits.

Copper Tin Plated Guide Strip

One of the key details of the CNP820H-2P is its copper tin plated guide strip. The product images highlight the tin-plated copper connection section inside the junction box.

Tin plating is used on the conductive surface to provide additional protection against oxidation and corrosion. For electrical connection components, maintaining a stable conductive surface is important for long-term connection performance. The plated guide strip also gives the internal connection area a clean and finished appearance.

The copper-based conductive part is positioned inside the housing, while the outer shell provides a separate space for the connection. This arrangement helps keep the wiring components organized after installation.

Compact Two-Pole Structure

The2-pole design provides a straightforward solution for two-wire connection requirements. Compared with a larger junction enclosure, the compact body takes up less installation space and can be useful where the available room around the cable is limited.

According to the dimensional drawing, the CNP820H-2P has a main body dimension of approximately 42.6 mm in the indicated direction, with a body height of approximately 19 mm. The overall cable section shown in the drawing extends approximately 72 mm, while the wire box height is marked as 11 mm.

These dimensions are provided as product reference values. Customers should refer to the final technical drawing or sample for detailed installation planning.

PP Housing

The rubber shell or housing material shown in the specification is PP. Polypropylene provides a lightweight housing solution with useful insulating characteristics for electrical connection applications.

The white housing gives the product a clean appearance and makes the connection section easy to recognize during installation. Its compact shape is also suitable for applications where cable connections need to be arranged without using a large electrical enclosure.

The cover and housing form a dedicated space around the connection components. When the wiring work is completed, the enclosed structure provides a more organized appearance than an exposed connection point.

PVC Cable Tail Pipe

The product specification lists PVC as the tail pipe material. The tail pipe provides a transition area between the cable and the junction box, helping create a more organized cable entry.

The indicated inner diameter of the tail pipe is 7.5 mm. This dimension should be considered together with the actual outer diameter and construction of the cable when selecting the product for a particular installation.

The cable entry design is especially useful when the junction box is installed along an existing cable rather than used as a completely open wiring enclosure.

Easy Cable Arrangement

A practical junction box should not only provide an electrical connection but also make the wiring easier to arrange. The CNP820H-2P places the conductive connection section inside the housing, allowing the cable connection to remain within a defined area.

The compact structure can be useful for electrical installers who need to keep connection points neat and consistent across multiple installations. It can also help manufacturers of electrical equipment create a more uniform cable connection arrangement.

Applications

TheCNP820H-2P 2 Pole Cable Junction Box can be considered for a range of electrical connection applications, including:

• Electrical wiring
• Lighting equipment
• Cable distribution
• Electrical equipment
• Control equipment
• Power connection points
• Equipment wiring
• General low-voltage cable connections

The product should always be selected according to the actual voltage, current, conductor size, cable dimensions and installation environment.

Designed for Practical Installation

The CNP820H-2P is focused on a simple combination of a compact housing, two-pole connection structure and cable entry section. This makes it suitable for projects where installers need a small connection solution without using a larger junction enclosure.

Its white PP housing, PVC cable tail pipe and copper tin plated guide strip form a practical combination for electrical connection work. The product is also relatively simple in structure, which can make it easier to understand and integrate into different wiring projects.

JINH Electrical Connection Solution

TheCNP820H-2P White Junction Box is part of the JINH WHITE JUNCTION BOX product range. The series is developed for different cable connection requirements, with different pole configurations available for different wiring applications.

For customers looking for a 2 pole cable junction box with a copper tin plated connection section, the CNP820H-2P provides a compact option with clearly defined electrical specifications.

JINH focuses on electrical connection products and can provide solutions for distributors, electrical installers, equipment manufacturers and OEM customers. For projects requiring different connection configurations, cable sizes or product specifications, customers can contact JINH for further product information and technical confirmation.