It combines a transparent PP shell, sealing sponge strips, insulating tape and two-component resin adhesive to help protect cable joints against moisture and environmental exposure.
Suitable for cable cross-sections from 4 × 2.4 mm² to 4 × 4 mm², the M10 kit offers a practical solution for electrical wiring projects that require a compact, sealed connection.
Its straightforward assembly process makes it suitable for professional installers and electrical maintenance applications.
JINH M10 Resin Cast Cable Joint Kit for Small Cable Connections
Product Overview
Reliable cable connections are essential in electrical installations, especially where cables may be exposed to moisture, dust or changing environmental conditions. The JINH M10 resin cast cable joint kit is designed to provide insulation and sealing for small multi-core cable joints. With a compact protective shell and a two-component resin system, it offers a practical way to enclose and protect a cable connection after the conductors have been properly joined.
The M10 is part of the JINH resin cast cable joint kit series, which includes models M10, M11, M12, M13, M14 and M15. Each model is intended for a different cable size range, allowing users to select a kit according to the cable dimensions and installation requirements of their project.
According to the product specification shown, the M10 accommodates cable cross-sections from 4 × 2.4 mm² to 4 × 4 mm². It is a suitable option for applications involving relatively small four-core cables, provided that the actual cable dimensions and installation conditions are compatible with the kit.
Main Features of the M10 Cable Joint Kit
1. Compact Protective Shell
The M10 kit uses a transparent PP shell to enclose the cable joint. Its compact design helps keep the joint components together and provides a defined space for the sealing material. The transparent shell also allows installers to see the interior during assembly, making it easier to check the placement of the joint and sealing components before the resin cures.
The shell is intended to work as part of the complete jointing system. Correct cable preparation, resin mixing and installation are all important to the final sealing result.
2. Resin-Based Insulation and Sealing
The kit includes a two-component resin adhesive system. When the components are mixed according to the supplied instructions and poured into the prepared shell, the resin fills the designated enclosure around the cable joint. After curing, it forms an insulating and sealing mass around the connection.
This process helps reduce the risk of moisture reaching the enclosed joint when the product is correctly selected and installed. The performance of the finished assembly depends on the resin formulation, the cable configuration, installation quality and the environmental conditions in which it is used.
3. Sealing Sponge Strips
Sponge strips are included to help prepare the shell and cable entry areas for resin filling. They help control the filling area and support the assembly process. Installers should position the sponge strips as directed in the product instructions to avoid gaps or incorrect placement.
4. Additional Installation Accessories
The M10 kit includes accessories such as insulating tape and a protective PP cover, as shown in the product images. These components support the assembly and sealing process. The exact arrangement should follow the installation instructions supplied with the kit.
The package is designed to bring the main jointing materials together in one set, helping installers prepare for the job without sourcing each listed accessory separately.
Product Specifications
The following information is based on the product chart and images provided for the M10 model.
| Item | Specification |
|---|---|
| Brand | JINH |
| Model | M10 |
| Product type | Resin cast cable joint kit |
| Shell material | PP, as indicated in the product image |
| Cable cross-sectional range | 4 × 2.4–4 × 4 mm² |
| Maximum cable diameter | 7–16 mm, as shown in the product chart |
| Main sealing material | Two-component resin adhesive |
| Included accessories | PP shell, PP cover, sponge strip, insulating tape and packaging |
| Typical purpose | Insulation and sealing of compatible cable joints |
The maximum cable diameter range shown in the product chart is 7–16 mm. This dimension should be checked against the actual outside diameter of the cable and the installation configuration before ordering. Cable cross-sectional area and overall cable diameter are different measurements, so both should be considered when selecting a joint kit.
Voltage rating, IP rating, curing time, resin quantity, applicable standards and any certification details should be confirmed with the manufacturer before the product is specified for a project.
Typical Applications
The M10 resin cast cable joint kit may be considered for small multi-core cable connections in electrical installation and maintenance work. Depending on the cable type and the verified performance of the complete assembly, potential applications may include:
Electrical wiring connections in suitable equipment installations.
Cable jointing work in maintenance and repair projects.
Low-voltage cable connections where a resin-based insulating enclosure is specified.
General electrical installations requiring a compact cable joint enclosure.
Projects where the cable joint needs additional protection from environmental exposure.
The product should be used only in applications compatible with its verified ratings and installation instructions. For underground, outdoor or permanently wet environments, confirm that the specific model is approved for the intended conditions before use.
Installation Guide
Correct installation is essential to the performance of a resin cast cable joint. Before starting, isolate the electrical circuit and follow the applicable electrical safety procedures. Installation should be carried out by a qualified person.
Step 1: Prepare the cable joint.
Select the correct M10 kit and check that the cable cross-section and outside diameter are within the specified ranges. Prepare and connect the conductors using an appropriate connection method. Ensure the joint is mechanically secure and that the insulation has been removed only where required.
Step 2: Position the shell and sponge strips.
Place the cable joint into the protective shell. Install the sponge strips and other components according to the supplied instructions. Check that the shell is correctly positioned and that the intended filling area is prepared.
Step 3: Mix the resin.
Open the resin package and combine the two components in the proportions and manner specified by the manufacturer. Mix thoroughly and observe the stated working time and safety precautions. Do not use resin that has exceeded its permitted working time.
Step 4: Pour the resin.
Pour the mixed resin into the prepared shell as directed. Make sure the filling process follows the instructions for the particular kit and cable arrangement. Avoid disturbing the cable joint during filling.
Step 5: Close the shell and allow curing.
Fit the cover and secure the assembly as instructed. Allow the resin to cure for the required period before handling or putting the cable back into service. Do not energize the circuit until the installation has been inspected and declared safe.
The steps above provide a general overview only. The instructions supplied with the actual M10 kit take priority, particularly for resin mixing, curing time and cable preparation.
How to Choose the Right Model
The JINH resin cast cable joint kit series covers several cable size ranges. Based on the provided chart, the M10 is intended for cable cross-sections from 4 × 2.4 mm² to 4 × 4 mm², with a listed maximum cable diameter range of 7–16 mm.
For larger cable sizes, the series includes M11, M12, M13, M14 and M15. Users should compare both the conductor cross-section and the cable's overall outside diameter with the corresponding model specifications. The number of cores, cable construction and available installation space may also affect selection.
If the cable dimensions are close to the stated limits, provide the cable specification and outside diameter to the supplier for confirmation before placing an order.
Why Consider JINH?
JINH focuses on electrical connection products and provides a range of cable jointing and connection solutions for different installation requirements. The M10 resin cast cable joint kit offers a compact option for compatible small cable joints, with the shell, resin and listed accessories supplied as a coordinated set.
For distributors, electrical contractors and equipment users, selecting a model based on verified cable dimensions and application requirements can help simplify product sourcing and installation planning. For project orders, buyers can contact JINH to confirm current specifications, packaging details, lead time and available customization options.
Frequently Asked Questions
What cable size is suitable for the M10 kit?
The provided product chart lists a cable cross-sectional range of 4 × 2.4 mm² to 4 × 4 mm². The listed maximum cable diameter range is 7–16 mm. Check both values against the cable being used.
What materials are included in the kit?
The product images show a PP shell, a PP cover, sponge strips, insulating tape, a two-component resin adhesive package and packaging accessories.
Can the M10 be used underground or underwater?
The product image describes the series as suitable for demanding environments, but the supplied information does not establish a verified IP rating or an approved underwater-use specification for M10. Confirm the manufacturer's technical documentation and the suitability of the complete installed joint before use in underground, submerged or permanently wet conditions.
How should the resin be prepared?
Follow the mixing ratio, procedure, working time and curing instructions supplied with the product. Incorrect mixing or premature handling may affect the quality of the finished joint.
How can I confirm whether M10 is the correct model?
Compare the cable cross-section and outside diameter with the product chart. If either measurement is close to the limit, send the cable specifications to the supplier for confirmation.
The JINH M10 resin cast cable joint kit is a compact solution for compatible small cable connections where resin-based insulation and sealing are required. Correct model selection and careful installation are essential to achieving a reliable cable joint.